Wolf DF606DG Use and Care Guide download pdf (Page 13)

wolfappliance.com

SURFACE OPERATION

Surface Burners

To light a burner, push and turn the corresponding control

knob counterclockwise to HI. The igniter will begin to click

until burner is lit. Once lit, continue to turn knob counter-

clockwise to desired setting.

To select a simmer setting, turn control knob to the detent

at the lowest setting. Push and continue to turn counter-

clockwise. The ame will transition to the second tier on

the burner cap. Continue to turn knob to desired simmer

setting.

During a power outage, surface burners can be lit manually.

Turn knob to HI and light using a multi-purpose lighter.

CAUTION

Never leave pans on a high setting unattended. Be

careful when cooking food in fat or grease; it can

become hot enough to ignite.

Oven Light

WARNING

Verify power is disconnected from electrical box before

replacing light bulb.

Allow oven to cool completely, then remove oven racks and

rack guides. To remove the light cover, gently pry bottom

edge with a at screwdriver. Remove existing bulb and

replace with a 20-watt halogen bulb. Refer to the illustration

below.

LIGHT

COVER

Light bulb replacement.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

No comments

Wolf DF606DG Use and Care Guide Page 13