Wolf MW24 Specifications download pdf (Page 45)

WOLF ELECTRIC COOKTOPS

45

IMPORTANT NOTE: A Wolf downdraft ventila-

tion system cannot be used with the unframed

electric cooktops.

IMPORTANT NOTE: Unframed electric cooktops

are not designed to be installed in combination

with other cooktops or modules.

ELECTRICAL REQUIREMENTS

The electrical requirements vary with the size

of the unframed electric cooktop. Refer to the

specifications on the following pages for the

two different cooktop sizes. Locate electrical

supply within the shaded area shown in the

Installation Specifications illustration for your

model.

IMPORTANT NOTE: When an oven is installed

below the cooktop, it is recommended that the

electrical supply be placed in the base cabinet to

the right of the oven, unless you are using

cabinets deeper than 24" (610). Refer to pages

4–14 for additional specifications for built-in

ovens.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes

and ordinances when installing your service.

PLANNING INFORMATION

Wolf recommends using 33" (838) cabinets

with the 30" (762) cooktop and 39" (991)

cabinets with the 36" (914) cooktop.

The Wolf 30" (762) and 36" (914) unframed

electric cooktops can be mounted flush with the

top of the countertop or as a frameless installa-

tion sitting on top of the countertop surface.

There’s no stainless steel trim, just the black

ceramic glass surface. In either installation the

cooktop cut-out dimensions are the same. If the

cooktop is to be mounted flush with the coun-

tertop, you will need to provide a recessed area

surrounding the cooktop cut-out.

IMPORTANT NOTE: If the cooktop is to be

mounted flush with the countertop, fabrication

of the recessed area must take place before the

final countertop installation. A template of the

countertop cut-out will be provided with the

cooktop for fabrication purposes.

Specifications on the following pages provide

overall dimensions, countertop cut-out dimen-

sions and installation specifics for the two

different-sized cooktops. We have minimized

the information contained in the illustrations,

concentrating on the critical information you

need to plan your installation.

A Wolf L Series or E Series built-in single oven

may be installed below these cooktops. Wolf

unframed electric cooktops are designed and

agency approved for installation with Wolf built-

in ovens only. Also, be aware of the depth of the

cooktop when planning for this installation.

A Wolf cooktop or Pro ventilation hood is

recommended with these cooktops. When

installing a ventilation hood, refer to the specific

requirements of the hood for the minimum

dimension to the countertop. Refer to pages

92–114 for ventilation specifications.

These cooktops are intended for indoor use.

This appliance must be installed in accordance

with National Electrical Code regulations as well

as all state, municipal and local codes. The

correct voltage, frequency and amperage must

be supplied to the appliance from a dedicated,

grounded circuit that is protected by a properly

sized circuit breaker or time delay fuse. The

proper voltage, frequency and amperage ratings

are listed on the product rating plate.

ACCESSORIES

Optional accessories

are available

through your Wolf

dealer. To obtain

local dealer

information, visit

the Showroom

Locator section of

our website,

wolfappliance.com.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 119 120

Comments to this Manuals

No comments