Wolf MW24 Specifications download pdf (Page 31)

WOLF INDUCTION COOKTOPS

PLANNING INFORMATION

You have three different sizes of induction

cooktops to choose from and all have the classic

stainless steel trim finish.

For ease of installation, Wolf recommends using

33" (838) cabinets with the 30" (762) cooktop

and 39" (991) cabinets with the 36" (914)

cooktop.

Specifications on the following pages provide

overall dimensions, countertop cut-out dimen-

sions and installation specifics for the three

different-sized cooktops. We have minimized

the information contained in the illustrations,

concentrating on the critical information you

need to plan your installation.

A Wolf L Series or E Series built-in single oven

may be installed below these cooktops. Wolf

induction cooktops are designed and agency

approved for installation with Wolf built-in ovens

only. Also, be aware of the depth of the cooktop

when planning for this installation.

IMPORTANT NOTE: When multiple cooktops or

modules are installed side by side, refer to page

55 for countertop cut-out dimensions.

These cooktops can accommodate a Wolf

cooktop hood, downdraft system or Pro ventila-

tion hood or hood liner. When installing a ventila-

tion hood, refer to the specific requirements of

the hood for the minimum dimension to the

countertop. Refer to pages 29–114 for ventilation

specifications.

ELECTRICAL REQUIREMENTS

The electrical requirements vary with the size

of the induction cooktop. Refer to the specifica-

tions on the following pages for the three differ-

ent cooktop sizes. Locate electrical supply within

the shaded area shown in the Installation

Specifications illustration for your model.

IMPORTANT NOTE: When an oven is installed

below the cooktop, it is recommended that the

electrical supply be placed in the base cabinet to

the right of the oven, unless you are using

cabinets deeper than 24" (610). Refer to pages

4–14 for additional specifications for built-in

ovens.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes

and ordinances when installing your service.

These cooktops are intended for indoor use.

This appliance must be installed in accordance with

National Electrical Code regulations as well as all

state, municipal and local codes. The correct

voltage, frequency and amperage must be supplied

to the appliance from a dedicated, grounded circuit

that is protected by a properly sized circuit breaker

or time delay fuse. The proper voltage, frequency

and amperage ratings are listed on the product

rating plate.

ACCESSORIES

Optional accessories

are available

through your Wolf

dealer. To obtain

local dealer

information, visit

the Showroom

Locator section of

our website,

wolfappliance.com.

ACCESSORIES

Induction Cooktops

Filler strip

Bracket supports for installation

of two integrated modules with

downdraft (Model DD30 only)

Accessories are available through

your Wolf dealer. To obtain local

dealer information, visit the

Showroom Locator section of our

website, wolfappliance.com.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 119 120

Comments to this Manuals

No comments

Wolf MW24 Specifications Page 31

Comments to this Manuals

Related products and manuals for Microwaves Wolf MW24