Wolf MW24 Specifications download pdf (Page 104)

Dimensions in

parentheses are in

millimeters unless

otherwise specified.

WOLF PRO VENTILATION

104

ELECTRICAL REQUIREMENTS

Wolf Pro wall and island hoods require a

separate, grounded 120 V AC, 60 Hz power

supply. The service should have its own 15 amp

circuit breaker. Placement of the electrical supply

is not critical, as long as you provide enough

120 V AC power cable to make your electrical

connections. Note that for some wall hoods,

placement of the electrical supply will differ

between vertical and horizontal discharge loca-

tions. Refer to pages 111–114 for blower and

ducting considerations to determine discharge

location.

Locate electrical within the shaded area shown

in the Installation Specifications illustration for

your model.

IMPORTANT NOTE: A ground fault circuit

interrupter (GFCI) is not recommended and may

cause interruption of operation.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes

and ordinances when installing your service.

PLANNING INFORMATION

Pro low-profile wall hoods are available in

30" (762), 36" (914), 42" (1067) and 48" (1219)

widths.

Pro 24" (610) deep wall hoods are available in

30" (762), 36" (914), 42" (1067), 48" (1219),

54" (1372), 60" (1524) and 66" (1676) widths.

Pro 27" (686) deep wall hoods are available in

30" (762), 36" (914), 42" (1067), 48" (1219),

54" (1372), 60" (1524) and 66" (1676) widths.

Pro wall chimney hoods are available in 36"

(914), 42" (1067), 48" (1219) and 54" (1372)

widths.

Pro island hoods are available in 36" (914),

42" (1067), 54" (1372) and 66" (1676) widths.

IMPORTANT NOTE: For optimal performance in

wall hood applications, a Pro 27" (686) deep wall

hood is recommended for use with ranges and

rangetops that contain a charbroiler or griddle.

Specifications on the following pages provide

overall dimensions, blower and ducting consider-

ations, and installation specifics for Pro wall and

island hoods. We have minimized the informa-

tion contained in the illustrations, concentrating

on the critical information you need to plan your

installation. Also refer to the Pro ventilation

recommendations on pages 117–120.

The overall dimensions illustrations include the

optional rail dimensions. Overall width, height

and depth dimensions will remain the same if a

decorative rail is not to be used.

Pro wall hoods should be at least as wide as

the cooking surface; an overlap of 3" (76) on

either side is recommended. Island hoods should

always be larger than the cooking surface by a

minimum of 3" (76) on each side.

Installation of all Pro wall and island hoods

should be 30" (762) to 36" (914) from the

bottom of the hood to the countertop.

Optional classic stainless steel duct covers are

available in heights of 6" (152), 12" (305), 18"

(457) and 24" (610) for all Pro wall and island

hoods.

ACCESSORIES

Optional accessories

are available

through your Wolf

dealer. To obtain

local dealer

information, visit

the Showroom

Locator section of

our website,

wolfappliance.com.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 119 120

Comments to this Manuals

No comments

Wolf MW24 Specifications Page 104

Comments to this Manuals

Related products and manuals for Microwaves Wolf MW24