Wolf MC24 User's Guide Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
6
|
Wolf Customer Care 800.222.7820
Installation
The convection microwave oven can be used freestanding
or built into cabinetry using accessory trim to match Wolf L
series or E series ovens.
For freestanding applications, a minimum 2"
(51) space is
required at the top, rear and sides of the microwave oven for
air circulation.
For built in applications, refer to installation instructions
provided with the trim kit. Accessory trim kits are avail able
through an authorized Wolf dealer. For local dealer infor-
mation, visit the nd a showroom section of our website,
wolfappliance.com.
Electrical
Installation must comply with all applicable electrical codes.
The receptacle should be located within reach of the power
cord. For built in applications, refer to installation instruc-
tions provided with the trim kit for electrical location.
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 120 VAC, 60 Hz
Service 15 amp dedicated circuit
Receptacle 3-prong grounding-type
Power Cord 4'
(1.2 m)
GROUNDING INSTRUCTIONS
This appliance must be grounded. The microwave oven
is equipped with a cord having a grounding wire with a
grounding plug. It must be plugged into a wall receptacle
that is properly installed and grounded in accordance with
the National Electrical Code and local codes and ordi-
nances. In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an escape wire
for the electric current.
WARNING
Improper use of the grounding plug can result in a risk
of electric shock. Do not use an extension cord. If the
power cord is too short, have a qualied electrician or
service technician install an outlet near the appliance.
INSTALLATION
Rating plate location.
RATING PLATE
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Comments to this Manuals

No comments