Wolf PWC482418 Installation Guide download pdf (Page 11)

Pro Wall Chimney Hood Installation 11

wolfappliance.com/specs

Duct Cover

IMPORTANT NOTE: I

f an optional duct cover is to be used

with the pro wall chimney hood, it must be attached

before installing the hood.

Installing a duct cover will impact all aspects of the

hood installation, including hood location, ducting,

electrical placement and the mounting surface.

DUCT COVER INSTALLATION

IMPORTANT NOTE:

For wall chimney hoods using a

600 CFM or 900 CFM internal blower, refer to installation

instructions provided with the blower assembly. Install the

internal blower prior to installing the duct cover.

1) Attach the duct cover from the inside of the hood

through the filter opening using the screws provided

with the duct cover. Leave screws partially loose until

all screws are installed.

2) Check alignment of the duct cover with the hood and

tighten the four corner screws to secure the duct cover.

Tighten all remaining screws.

3) Proceed with installation of the wall hood.

MOUNTING

SCREW

DUCT

COVER

Duct cover installation.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Wolf PWC482418 Installation Guide Page 11