Wolf PW482210 Specifications download pdf (Page 20)

20

WOLF PRO WALL VENTILATION HOODS

ACCESSORIES

Optional acces-

sories are available

through your

Wolf dealer. To

obtain local dealer

information, visit

the Showroom

Locator section of

our website,

wolfappliance.com.

FILTER INSTALLATION

Follow these instructions to install filters and

grease cups for Wolf Pro wall hoods:

Remove all packaging material from the

filters and grease cups.

Slide the grease cups along the bottom

edge of the hood so that the lip of the

grease cup overhangs slightly.

Install the filters. Orient each filter with

lines running vertically. Position the top

edge of the filter as shown in the illustra-

tion below. While pressing up against the

spring, rotate the bottom edge of the filter

into position next to the grease cup. Gloves

should be worn to provide proper grip

when installing filters.

IMPORTANT NOTE:

The illustration shows a

27" (686) deep wall hood filter installation, with

the filter sloping up from front to back. For

low-profile and 24" (610) deep hoods, the filter

will slope down from front to back.

WOLF NAMEPLATE

The Wolf logo nameplate does not come

installed on the hood since there are various

locations that the nameplate can be attached.

Also, some customers prefer not to have a

nameplate on their hood.

A template for positioning the Wolf logo

nameplate in a standard location is included

on the back page. Follow these steps to install

the nameplate:

Decide on the location for the nameplate.

Clean the mounting area with rubbing

alcohol.

If desired, cut out the template from the

back page. Fold the template, locate place-

ment on hood and tape to the hood surface.

Check alignment and adjust if necessary.

Remove backing paper from the nameplate.

Position the nameplate in the template

cut-out and press into place.

Remove the template and any tape residue.

Grease Cup SIDE VIEW

Filter

Spring

Filter installation—27" (686) deep

wall hood shown

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments