Wolf IDF606CG Specifications Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
PLANNING INFORMATION
From a planning perspective, your selection
process is made easier by the three different
sizes you have to choose from. For ease of
installation, Wolf recommends using 838 mm
cabinets with the 762 mm cooktop and 991 mm
cabinets with the 914 mm cooktop.
Specifications on the following pages provide
overall dimensions, countertop cut-out dimen-
sions and installation specifics for the three
different-sized cooktops. We have minimized
the information contained in the illustrations,
concentrating on the critical information you
need to plan your installation.
A Wolf single built-in oven may be installed
below these cooktops. Wolf framed electric
cooktops are designed and agency approved for
installation with Wolf built-in ovens only. Also,
be aware of the depth of the cooktop when
planning for this installation.
Multiple cooktops and/or integrated modules
can be installed side by side. Refer to the coun-
tertop cut-out dimensions on page 19 when
planning for this installation.
These cooktops can accommodate a Wolf
cooktop hood or downdraft system. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to the countertop. Refer to pages
57–66 for ventilation specifications.
ELECTRICAL REQUIREMENTS
Electric cooktops require a separate, grounded
220-240 V AC, 50/60 Hz electrical supply with
its own circuit breaker. Locate electrical supply
within the shaded area shown in the Installation
Specifications illustration for your model.
IMPORTANT NOTE: When an oven is installed
below the cooktop, it is recommended that the
electrical supply be placed in the base cabinet to
the right of the oven, unless you are using
cabinets deeper than 610 mm. Refer to pages
67 for additional specifications for built-in
ovens.
You must follow all local codes and ordinances
when installing your service.
WOLF ELECTRIC COOKTOPS
These cooktops are intended for indoor use.
This appliance must be installed in accordance with
local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a
dedicated, grounded circuit that is protected by a
properly sized circuit breaker or time delay fuse.
The proper voltage, frequency and amperage ratings
are listed on the product rating plate.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer.
ACCESSORIES
Electric Cooktops
Filler strip
Bracket supports for installation
of two integrated modules with
downdraft (Model DD30 only)
Accessories are available through
your Wolf dealer.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Comments to this Manuals

No comments