Wolf CART36 Installation Guide download pdf (Page 12)

Outdoor Grill Installation 12

LP Gas Installations

PORTABLE LP CONNECTION

One of the many features of the Wolf grill cart is the

pull-out shelf for easy access to the LP gas cylinder. It is

designed to hold a 20-lb (5 gallon capacity) LP gas

cylinder.

1) To install the LP gas cylinder, pull out the shelf and

place the cylinder on it.

2) Check to ensure that the gas valve on top of the

cylinder is closed.

3) Connect the LP gas regulator to the cylinder and

hand-tighten only. Open the cylinder valve. Check for

leaks according to the gas leak testing procedure on

page 13.

4) Tighten the thumb screw to secure the cylinder to the

shelf.

Always check for gas leaks after changing the LP gas

cylinder.

Do not place more than one LP gas cylinder in an

enclosure at one time.

Grill cart pull-out shelf.

LP GAS CONNECTION

Install the pressure regulator and hose assembly supplied

with the outdoor product as shown in the illustrations

below. Connect the

/8" flare end of the hose to the unit

coupling using a

/4" open wrench. Do not apply pipe

sealant to the

/8" flare connection. Connect the regulator

to the LP cylinder hand-tighten, do not use a wrench.

LP GAS

CYLINDER

REGULATOR

GRILL

COUPLING

VENT

HOSE

ASSEMBLY

LP gas connection. LP gas regulator.

LP GAS

CYLINDER

TO GRILL

VENT

REGULATOR

COUPLING NUT

The LP pressure regulator and hose supplied with the

outdoor product must be used without alteration.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Wolf CART36 Installation Guide Page 12

Comments to this Manuals

Related products and manuals for Barbecues & grills Wolf CART36