Wolf PW302418 Installation Guide download pdf (Page 17)

Pro Wall Hood Installation 17

wolfappliance.com/specs

WOLF LOGO

To install the Wolf logo, clean the mounting area with

rubbing alcohol. Remove paper backing from the logo,

position parallel with the bottom of the hood and press to

place.

Complete the Installation

FILTER INSTALLATION

To install filters, press upward then rotate bottom outward.

The filter vanes should be placed perpendicular to the

front of the hood. Refer to the illustration below. To aide in

removal, remove center filter first. Gloves should be worn

when handling filters.

LIGHT BULB INSTALLATION

A suction-cup-style light bulb changer is provided with

pro ventilation hoods. Use the changer to push the bulb

into the receptacle and rotate counterclockwise one-

quarter turn. Refer to the illustration below.

FILTER

SIDE VIEW

SPRING

GREASE

CUP

Filter installation. Light bulb installation.

LIGHT BULB

CHANGER

1 2 ... 12 13 14 15 16 17 18 19 20

No comments

Wolf PW302418 Installation Guide Page 17