Wolf PW302418 Installation Guide download pdf (Page 16)

Pro Wall Hood Installation 16

Before making electrical connections, make sure the

electrical power is turned off at the service panel.

) Remove the electrical box cover from inside the hood.

Insert Romex

from service panel (and Romex

from

in-line or remote blower, if applicable) through the back

of the hood and into the electrical box. Secure with an

appropriate electrical connector. Refer to the illustra-

tion below.

2) Use wire connectors provided to connect black to

black, white to white and green to green/bare wire. For

in-line and remote blowers, attach the cord assembly

to Romex

from the blower.

3) Place all wiring connections inside the electrical box

and reinstall electrical box cover. Verify all wires are

secure and not pinched between cover.

4) Insert cord assembly plug into hood receptacle. Refer

to the illustration below. Turn on power and check

operation.

ELECTRICAL BOX

(INSIDE HOOD)

Location of electrical box. Location of receptacle.

RECEPTACLE

(INSIDE HOOD)

Electrical Connection

IMPORTANT NOTE: Refer to specific installation instruc-

tions provided with each blower assembly for additional

mounting and wiring instructions.

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Wolf PW302418 Installation Guide Page 16