Wolf CT36I/S Specifications download pdf (Page 9)

9

Dimensions in parentheses are in

millimeters unless otherwise specified.

INSTALLATION INSTRUCTIONS

MULTIPLE COOKTOP INSTALLATION

If the framed induction cooktop is to be used

with any combination of additional cooktop

units or modules with a filler strip, the cut-out

width is calculated by adding the correspon-

ding units' cut-out dimensions plus 1

1

/4" (32)

for each additional unit. Refer to the illustra-

tion below.

IMPORTANT NOTE:

For Model CT15I/S, the

cut-out width should be increased from 13

3

/8"

(340) to 14" (356) when installed with multiple

units.

IMPORTANT NOTE:

Unframed induction

cooktops are not designed to be installed in

combination with other cooktops.

IMPORTANT NOTE:

When multiple units are

installed side by side, each unit must have its

own separate recommended electrical circuit.

2

1

/2"min

(64)

FRONT OF COUNTERTOP

19

1

/4"

(489)

CUT-OUT

DEPTH

29

1

/4" (743)

TWO MODULES WIDTH

44

1

/2" (1130) THREE MODULES WIDTH OR

44

1

/4" (1124) 30" COOKTOP AND ONE MODULE

59

3

/4" (1518) FOUR MODULES WIDTH OR

59

1

/2" (1511) 30" COOKTOP AND TWO MODULES OR

50

1

/4" (1276) 36" COOKTOP AND ONE MODULE

14"

(356)

CUT-OUT

WIDTH

Countertop cut-out dimensions for installation of multiple cooktops

ACCESSORIES

Optional acces-

sories are available

through your

Wolf dealer. To

obtain local dealer

information, visit

the Locator section

of our website,

wolfappliance.com.

When two or more modules are installed

together, an integrated module filler strip

(IFILLER/S) is recommended. If a 30" (762)

downdraft ventilation system is also installed,

an integrated module support for downdraft

ventilation (ISUPPORT) is also required.

Contact your Wolf dealer for information on

these accessory components.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments