Wolf CT36I/S Specifications download pdf (Page 12)

12

WOLF INDUCTION COOKTOPS

UNFRAMED INSTALLATIONS

MODELS CT30IU AND CT36IU

Unframed induction cooktop Models CT30IU

and CT36IU can be mounted flush with the top

of the countertop or as a frameless installation

with the glass mounted on top of the counter-

top surface.

IMPORTANT NOTE:

The materials required

for a flush mount installation are provided with

the unframed Models CT30IU and CT36IU.

Refer to the instructions provided with the

unframed cooktop installation kit (#811358) for

additional specifications.

FLUSH MOUNT INSTALLATION

There are two options for a flush mount

installation of the unframed induction cooktop;

Option 1 and Option 2.

OPTION 1:

For this flush mount installation, a

recessed area surrounding the standard coun-

tertop cut-out is required. Fabrication of the

recessed area must take place before the final

countertop installation. A template of the coun-

tertop cut-out is provided with the unframed

cooktop for fabrication purposes.

IMPORTANT NOTE:

This fabrication method is

not recommended for molded backsplash style

countertops (triple cove).

For countertop cut-out dimensions, refer to

the Installation Specifications illustration on

page 10 for Model CT30IU and page 11 for

Model CT36IU.

In order to rout the required recessed area for

this flush mount installation, a second

template must be made from

1

/2" (13) plywood.

The template will be used as a guide for a top

bearing router bit.

Make the wood template wide enough so that

clamps used to hold this template to the coun-

tertop do not interfere with the router base.

The cut-out dimension of the wood template

should match the outer perimeter of the

template supplied with the cooktop.

Center the wood template over the existing

cut-out in the countertop and clamp. It may be

helpful to use medium-strength double-sided

tape to adhere the template to the countertop;

this will keep the template from shifting during

the routing operation. Make sure that the

adhesive can be easily removed by testing it

on a scrap piece of the countertop. Using a top

bearing router bit with the wood template as a

guide, rout out a

5

/16" (8) deep recessed area in

the countertop cut-out.

Flush mount installations are intended

for granite, solid surface or stone coun-

tertop surfaces only. Failure to use high

heat resistant surface will result in coun-

tertop damage if hot cooking utensils are

accidentally moved off the cooking

surface.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments