Wolf WWD30 Installation Guide

Warming DrawersINSTALLATION GUIDE

Warming Drawer Specifications 1024" (610) minOPENING DEPTH*Platform must support 250 lbs (113 kg).NOTE: Location of electrical supply within oven

Warming Drawer Specifications 11wolfappliance.com/specs303/8" (772) minFLUSH INSET WIDTHSIDE CLEATS243/4"(629) minFLUSHINSETDEPTH1"(25)

Warming Drawer Specifications 12303/8" (772) minFLUSH INSET WIDTHSIDE CLEATS243/4"(629) minFLUSHINSETDEPTH1"(25)*Platform must support

Warming Drawer Specifications 13wolfappliance.com/specs273/16"(691)OPENINGHEIGHT281/8"(714) minFLUSH INSETHEIGHT281/2" (724)E SERIES OV

Install the Warming DrawerUnpack the warming drawer on a flat surface. Remove allpackaging materials from inside the warming drawer. Donot discard the

TroubleshootingIMPORTANT NOTE: If the warming drawer does notoperate properly, follow these troubleshooting steps:• Verify that electrical power is be

WOLF APPLIANCE, INC. P. O. BOX 44848 MADISON, WI 53744 WOLFAPPLIANCE.COM 800.222.7820816978 REV-A 1/2011

Important NoteTo ensure the safe and efficient use of Wolf equipment,please take note of the following types of highlightedinformation throughout this

Wolf Warming Drawers 3wolfappliance.com/specsWarming Drawer InstallationIMPORTANT NOTE: This installation must be completedby a qualified installer or

Installation Considerations 4Installation Considerations•The warming drawer must be installed with a Wolfstainless steel or integrated drawer front. M

Installation Considerations 5wolfappliance.com/specsCombination InstallationsRefer to the illustrations showing combination installationson pages 10–1

Installation Considerations 6223/4" (578)281/4" (718)9"(229)103/8"(264)211/2"(546)3/4"(19)3/4" (19)ABB297/8" (

Installation Considerations 7wolfappliance.com/specsMounting holes will need to be drilled in the back of thedrawer front panel. Holes should be drill

Warming Drawer Specifications 8ANTI-TIP BLOCKDIMENSIONWILL VARY**Dimension must accommodate height of anti-tip block and drawer face overlap.NOTE: Loc

Warming Drawer Specifications 9wolfappliance.com/specsDIMENSIONWILL VARY*231/2"(597)TYPICAL*Dimension must accommodate height of anti-tip block a