Wolf SRT484DG Use and Care Guide Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
Sealed Burner Rangetop Care 20
Care Recommendations
RANGETOP CLEANING TIPS
Wait until surfaces are cool before cleaning.
For best results, wipe up spills and spatters as they
occur and immediately after the rangetop has cooled.
If splatters are allowed to cook on, they may perma-
nently damage or stain the finish.
If in doubt about using one of your cleaners, check the
label. To check if it is safe to use on your rangetop, try
a small amount on an inconspicuous area.
Use caution when spraying cleaners. Some contain
caustic ingredients that can damage adjacent parts
and finishes. Protect the adjacent parts by masking
them off to avoid damage by overspray.
Never wipe a warm or hot porcelain surface with a
damp sponge; it may cause chipping or crazing (tiny
hairlike cracks).
Hand wash all decorative components, including
control knobs, bezels, grates and burner caps. These
components should not be cleaned in the dishwasher.
Do not spray cleaners on control knobs or igniters.
GENERAL CLEANING
Burner grates (porcelain-coated cast iron).
Remove burner grates and clean with a nonabrasive
cleaner such as liquid detergent in hot water or a paste
of baking soda and water. Spray degreasers and mild
abrasive cleaners may be used.
Burner pan (porcelain enamel).
Do not use abrasive cleaners; they will permanently
scratch porcelain enamel surfaces. Use a clean cloth
or sponge and wipe the surface with warm water and a
mild detergent. Rinse and dry immediately.
B
urner caps (porcelain enamel).
Wash in warm water and liquid detergent or mild
abrasive cleaner. Rinse and dry.
Spark igniters (ceramic).
Keep dry; never spray water or cleaner directly on the
igniter. When cleaning surface burners, avoid contact
with the igniter.
Control knobs and bezels.
Wipe control knobs and bezels with a damp cloth and
mild detergent and water; rinse and dry. Do not soak, or
use abrasive cleaners, they will scratch the finish and
remove markings. Do not clean in the dishwasher.
Control panel (stainless steel).
Use a spray degreaser to remove fingerprints and food
soils. Spray on a cloth and the wipe panel. Do not spray
directly on the panel around valve stems.
Rangetop exterior, riser and trim (stainless steel).
Do not use abrasive cleaners; they will permanently
scratch stainless steel surfaces. Salt and some cooking
liquids may pit and stain the surface. Remove these
spills immediately.
Use a spray degreaser to remove fingerprints and
greasy spatters. Spray on a cloth and wipe the surface.
Buff dry immediately to avoid streaking. For hard water
stains, use white vinegar and water.
For general cleaning, use a soft, nonabrasive stainless
steel cleaner like Signature polish and apply with a soft
lint-free cloth. To bring out the natural luster, lightly wipe
the surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. All work should
follow the grain of the finish. For best results, keep the
cloth in continuous contact with the surface.
Signature polish is available from Signature Limited
Laboratory, P. O. Box 13436, Dayton, Ohio 45413, or
call 877-376-5474.
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments